Re: FN-FORUM Access via router

date posted 27th January 2003 13:49

Hi

I don't use this particular model, but I use VNC over a wireless network
and it works fine. I have an U.S Robotics Access Point connected to a hub(A
friend of mine has an Acces point connected to a router) and a D-Link Card
in my laptop.
The longer the distance to the access point the slower the data transfer. I
had to reposition my Access point to a more central location in my home. It
was also a nightmare to install the hardware (Mainly manaufactor related,
bat documented), but there after I had no problems. I am glad I did it.

I hope thats helps....

Stephan

www.koern.com


----- Original Message -----
From: "Paul J White" [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sent: Monday, January 27, 2003 12:54 PM
Subject: Re: FN-FORUM Access via router


> > I have been considering buying a Linksys EtherFast Wireless Cable/DSL
> Router BEFW11S4 from Amazon.
> > If I do this will I be able to access each of my PC's individually using
> VNC
> > from the Internet by setting up some sort of port mapping on the router
?
> >
> I'm not sure Dennis, but I'm in the middle of networking the house and
have
> found the newsgroup at blueyonder.users.self-help.networking to be full of
> knowledgeable and helpful folks.
>
> HTH, Paul.
>
> ========
> Freelancers and Freelance Jobs: http://www.freelancers.net
>
> Advertise with Freelancers.net http://www.freelancers.net/advert.php
>
> To unsubscribe please email:
> [EMAIL REMOVED]
>
> If you have difficulties unsubscribing please email:
[EMAIL REMOVED]
>