Freelancers Forum Messages on Saturday February 21st 2004
Re: FN-FORUM: network problem
date posted 21st February 2004 23:55
Putting a gateway address in won't make them ping each other - only used for
getting to the Internet. Are you sure you don't have a firewall? The cable
is definitely a X-over, isn't it, not a regular...
RE: FN-FORUM: (Totally OT) New telescope
date posted 21st February 2004 23:52
Oooh... will have to check out the new SkyWatcher Muskatov myself then!
Have fun,
Dave.
__________________________________________________
Dave Boulden, Director. DA Media Limited
web: http://www.d...
Re: FN-FORUM: network problem
date posted 21st February 2004 22:49
PAMELA WHITTAKER wrote:
> Should the gateway be the same as the IP address
> or doesn't it matter?
The gateway address is used, in simple terms, to say which device can
route packets to external n...
Re: FN-FORUM: Additional pixel when using divs
date posted 21st February 2004 22:38
>Post the URL and I'll have a look tomorrow - wouldn't trust my gin sodden
>brain ATM ;-)
http://www.intexdesign.net/layout/header.html
I've coloured the background so you can see the gap.
Paul
_...
Re: FN-FORUM: Additional pixel when using divs
date posted 21st February 2004 21:45
Paul Cooper wrote:
>
> Hi
>
> I've actually managed to sort out this problem but don't really
> understand why. For a header I wanted to emulate this table layout....
>
Post the URL and I'll hav...
FN-FORUM: Additional pixel when using divs
date posted 21st February 2004 21:35
Hi
I've actually managed to sort out this problem but don't really understand
why. For a header I wanted to emulate this table layout....
-------------------8...
Re: FN-FORUM: network problem
date posted 21st February 2004 20:14
It definitely isn't the cable as I had that checked yesterday. They can ping
themselves ok which is something. I am afraid I am still on dial up at the
moment - boo hoo. I think I will have to get an...
RE: FN-FORUM: (Totally OT) New telescope
date posted 21st February 2004 20:14
Err! Long time deciding. I guess I decided I wanted to spend my £500 on the
best optics I could buy for that money and not include a goto, also keeping
in mind size and portability. The Meade equival...
RE: FN-FORUM: (Totally OT) New telescope
date posted 21st February 2004 19:54
Hi Joe,
Yes I have lined it up now - but it's still cloudy :-( I thought I'd go one
step at a time, get use to the scope first, then buy drive, and perhaps goto
sw, want piggy back for camera first,...
FN-FORUM: Useful tool tip#1
date posted 21st February 2004 18:51
http://members.rogers.com/parse-o-matic/sample.htm
TextHarvest is a text processing tool, that allows you to copy and extract
lines from a (text) file, that contain a specific word or term
I'm sure...
FN-FORUM: They too have a browser
date posted 21st February 2004 18:48
iCapture is a great tool for Windows-based web developers who don't have
access to a Mac. Just enter a URL and wait 30 seconds to see a screenshot
of that URL as seen in Safari
http://www.danvine.c...
Re: FN-FORUM: CSS Image Position Not working
date posted 21st February 2004 18:16
Tried the test page & nothing using Safari, IE, Camino or Opera on a Mac.
On 21/2/04 7:04 pm, "Tony Crockford" [EMAIL REMOVED] wrote:
>
> On 21 Feb 2004 18:13:32 -0000, Steve P [EMAIL REMOVED] wrot...
Re: FN-FORUM: CSS Image Position Not working
date posted 21st February 2004 18:15
Tony Crockford wrote:
>
> you could try scroll instead of fixed - the image will then move down a
> scrolling page - not pretty though....
>
> are you sure you want to do this design?
>
Hehe, I w...
Re: FN-FORUM: CSS Image Position Not working
date posted 21st February 2004 18:09
On 21 Feb 2004 18:13:32 -0000, Steve P [EMAIL REMOVED] wrote:
>
> Hi,
> Can anyone help. I'm trying to get a DIV to expand the full height on the
> browser window with an image to sit at the bottom l...
Re: FN-FORUM: CSS Image Position Not working
date posted 21st February 2004 18:02
On 21 Feb 2004 18:13:32 -0000, Steve P [EMAIL REMOVED] wrote:
>
> Hi,
> Can anyone help. I'm trying to get a DIV to expand the full height on the
> browser window with an image to sit at the bottom l...
Re: FN-FORUM: CSS Image Position Not working
date posted 21st February 2004 17:54
Correction !!
height:282px;
thats what you get for trying to listen to the rugby at the
same time !!
On 21 Feb 2004 18:44:58 -0000, ken mcewan wrote:
>
>Try:
>
>#sideimg {
>position: absolute
>bac...
Re: FN-FORUM: CSS Image Position Not working
date posted 21st February 2004 17:50
Try:
#sideimg {
position: absolute
background:"url('images/ind_16.gif') left no-repeat fixed";
left:0px;
top:100%;
width:139px;
height:100%;
margin: 0px;
padding: 0px;
border: 0px;
margin-top: -282px...
RE: FN-FORUM: CSS Image Position Not working
date posted 21st February 2004 17:49
Hi Paul,
I think I didn't format the CSS correctly. I think it's a bit better now
Cheers
Steve
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] Behalf Of Paul J
White
Sent: 21 Februar...
Re: FN-FORUM: network problem
date posted 21st February 2004 17:41
If you are using ICS, set the other one to DHCP (and the one with ICS will
set itself to 192.168.0.1). What you have got should work, though with the
addition of a def gateway. Easier to get ICS to do...
Re: FN-FORUM: CSS Image Position Not working
date posted 21st February 2004 17:40
Blank screen in Opera 7 on XP, i'm no CSS expert but thought that might be
useful.
Cheers,
Toby
----- Original Message -----
From: "Steve P" [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sent: Saturday, Febr...
Re: FN-FORUM: CSS Image Position Not working
date posted 21st February 2004 17:35
Steve P wrote:
> Hi Paul,
> Well tried it and it seems to work in IE6. Thanks.
> Does it work in other browsers though???
> http://www.ez-zone.co.uk/projects/test.htm
>
Blank screen in Firefox and...
Re: FN-FORUM: network problem
date posted 21st February 2004 17:34
Change the cable, if no hub, must be cross-over cable. Make sure network
card speed etc is not set to auto, try 100 half. Make sure XP isn't trying
to bridge connections.
Two auto-assigned addresses...
RE: FN-FORUM: CSS Image Position Not working
date posted 21st February 2004 17:29
Hi Paul,
Well tried it and it seems to work in IE6. Thanks.
Does it work in other browsers though???
http://www.ez-zone.co.uk/projects/test.htm
Cheers
Steve
-----Original Message-----
From: [EMAIL RE...
Re: FN-FORUM: CSS Image Position Not working
date posted 21st February 2004 17:24
Steve P wrote:
> Hi,
> Can anyone help. I'm trying to get a DIV to expand the full height on the
> browser window with an image to sit at the bottom lefthand corner of the
> screen
> For some reason...
FN-FORUM: CSS Image Position Not working
date posted 21st February 2004 17:17
Hi,
Can anyone help. I'm trying to get a DIV to expand the full height on the
browser window with an image to sit at the bottom lefthand corner of the
screen
For some reason it's just not working in I...
Re: FN-FORUM: network problem
date posted 21st February 2004 16:12
Ethernet adapter Local Area connection
connection specific dns suffix :
ip address :192.168.0.11
subnet mask 255.255.255.0
default gateway :
is the other one
Thanks
Pam
----- Original Message ----...
Re: FN-FORUM: network problem
date posted 21st February 2004 16:03
Ethernet adapter Local Area connection
connection specific dns suffix :
ip address :192.168.0.10
subnet mask 255.255.255.0
default gateway :
ppp adapter My connection
connection specific dns suffix :...
Re: FN-FORUM: network problem
date posted 21st February 2004 15:00
> Hi,
> I have done what Peter has suggested but I still can't get them to
Ping
> each other.Has anyone else got any ideas please.
>
Once you've done what Peter suggested what is the output of ip...
Re: FN-FORUM: network problem
date posted 21st February 2004 14:55
Hi,
I have done what Peter has suggested but I still can't get them to Ping
each other.Has anyone else got any ideas please.
Thanks
Pam
----- Original Message -----
From: "PAMELA WHITTAKER" [E...
Re: FN-FORUM: CSS positioning advice
date posted 21st February 2004 14:29
Thanks George / Tony. I was a bit hasty with my post as I've now looked at
the slices I've been given, and basically the whole table content is
provided as a gif. If they want it done like that it...
Re: FN-FORUM: CSS positioning advice
date posted 21st February 2004 14:08
On 21 Feb 2004 14:27:35 -0000, Paul Cooper [EMAIL REMOVED] wrote:
>
> Hi
>
> I’m after some more CSS-P advice. I need to code up some screens like
> this next week...
>
> http://www.intexdes...
Re: FN-FORUM: CSS positioning advice
date posted 21st February 2004 13:48
Paul Cooper wrote:
> I’m after some more CSS-P advice. I need to code up some screens like
> this next week...
>
> http://www.intexdesign.net/layout/layout.html
I'm sure you'll get a defacto ans...
FN-FORUM: CSS positioning advice
date posted 21st February 2004 13:31
Hi
I’m after some more CSS-P advice. I need to code up some screens like this
next week...
http://www.intexdesign.net/layout/layout.html
I know it’s tabular data but for my own learning I wan...
RE: FN-FORUM: Frames???
date posted 21st February 2004 12:27
> ok how do i use css to do somthing an iframe does(i use it for scrolling
> content)?
...YaddaYa...
RE: FN-FORUM: (Totally OT) New telescope
date posted 21st February 2004 11:36
Theresa,
It was me you had a chat with. So you didn't go for the
Meade? Just out of curiosity, what made you go for SkyWatcher instead?
Dave.
__________________________________________________
Dav...
Re: FN-FORUM: (Totally OT) New telescope
date posted 21st February 2004 09:55
How do I do it? Easy....I have no life.....:-)
I had a moment of epiphany some years ago when I watched a Simpsons episode
where the French nuke Springfield and comic book man meets the incoming
Fre...
RE: FN-FORUM: (Totally OT) New telescope
date posted 21st February 2004 08:45
:)
How do you do this? 8am Saturday and your sorting your mail??
I wish I was like that...
Have a nice weekend
Susan =)
susanengel
graphicdesign
m: 077 0943 6103
www.susanengel.co.uk
www.susanengel....
Re: FN-FORUM: (Totally OT) New telescope
date posted 21st February 2004 08:34
Getting the finder lined up is a pain in the bum but well worth it.
Is it a motor drive or mechanical drive?
I have a very old Polaris motor drive which I use occasionally for
astro-photography and...
Re: FN-FORUM: Pay Dirt / Taxman!
date posted 21st February 2004 08:31
Ahhh......
When I looked at this because I had low expensiture on the business, I was
marginally better off. Also, it was a 'low hassle' way of handling stuff
and even with an accountant in tow I do...
|
|