Freelancers Forum Messages on Tuesday October 25th 2005
RE: FN-FORUM: Fitting internal SATA drives
date posted 25th October 2005 22:49
well I took a deep breath and unscrewed the computer from the rack.... .. ..
.. and no cables ...so I've ordered sata cables and a power splitter ...more
worrying is there are no bays available - so b...
RE: FN-FORUM: multiple computers
date posted 25th October 2005 19:54
As long as you're only using one at a time, I believe that's "OK" within
the bound of many licenses. It certainly is true of MS Office (PC to
Laptop), so it's worth reading the license. You did read i...
FN-FORUM: Javascript artifact in IE?
date posted 25th October 2005 19:24
Hi,
Would someone be king enough to take a look at this page in IE and tell me
where the hell "Nights14 Nights" or "Nights21 Nights" is coming from? I'm
seeing them left justified and above the "Con...
FN-FORUM: Authenticating Windows Media Server
date posted 25th October 2005 19:19
Has anybody tried to place some kind of authentication process inbetween
accessing windows media server content and soem kind of access record. I
know you can use active directory to authenticate ac...
Re: FN-FORUM: doing so well ...
date posted 25th October 2005 19:17
i'll have to stop looking for quick answers before rushing off to
meetings...sorry john...
Richard Davey wrote:
>Hi Steve,
>
>Tuesday, October 25, 2005, 3:30:32 PM, you wrote:
>
>
>
>>this should...
Re: FN-FORUM: MS Organisational Chart
date posted 25th October 2005 19:08
It's a part of Office (older versions) like the equation editor, the drawing
tools. ms chart etc. It's actually not part of Office anymore as you are
supposed diagrams instead, but it is still there...
Re: FN-FORUM: Fitting internal SATA drives
date posted 25th October 2005 19:07
Hi Andrew,
Tuesday, October 25, 2005, 5:07:08 PM, you wrote:
> My computer is in a rack - just wondered if anyone knew before I
> pull it all to bits if there are likely to be appropriate cables on...
RE: FN-FORUM: Fitting internal SATA drives
date posted 25th October 2005 18:21
> which hopefully I'll find in the box. I only want to pull the machine to
bits once if possible - don't mind ordering cables if needed but
> I'd rather know before I look - does that make sense! :)...
FN-FORUM: Windows Media Server & Licencing
date posted 25th October 2005 18:07
Can I set up Windows Media Player server & player so an end user has to have
a licence to view content or would I have to do something else to achieve
this?
Best Regards
John...
RE: Re[2]: FN-FORUM: doing so well ...
date posted 25th October 2005 18:05
It is exactly that Rich, which is how I get the most out of my layers and
transparencys. CSS validation can get stuffed ;-).
At least my HTML validated - it's a start.
My guess is it's just an alph...
RE: FN-FORUM: Fitting internal SATA drives
date posted 25th October 2005 17:08
> computer is 16 months old MS-6788 ATX mainboard with 2 sata sockets -
> according to the manual - but I haven't pulled it out of the rack to see
> yet - so you think there will be cables 'in the box...
RE: FN-FORUM: Fitting internal SATA drives
date posted 25th October 2005 17:06
>>All my SATA drives use the normal power cables and a standard SATA cable
which is basically like a tiny IDE cable, about a thumbnail wide.
which hopefully I'll find in the box. I only want to pull...
RE: FN-FORUM: Fitting internal SATA drives
date posted 25th October 2005 17:05
computer is 16 months old MS-6788 ATX mainboard with 2 sata sockets -
according to the manual - but I haven't pulled it out of the rack to see
yet - so you think there will be cables 'in the box' wait...
RE: FN-FORUM: Fitting internal SATA drives
date posted 25th October 2005 17:01
> My computer is in a rack - just wondered if anyone knew before I pull it
all to bits if there are likely to be appropriate cables on the
> motherboard - there are two SATA connections on the MB....
Re: FN-FORUM: Fitting internal SATA drives
date posted 25th October 2005 17:00
> Just got myself a pair of Maxtor Maxline III 250Gb S150 SATA drives from
> dabs.com - which come without any instructions/fittings/cables etc.
> http://www.dabs.com/ProductView.aspx?QuickLinx=3D3NWV...
FN-FORUM: Fitting internal SATA drives
date posted 25th October 2005 16:57
Just got myself a pair of Maxtor Maxline III 250Gb S150 SATA drives from
dabs.com - which come without any instructions/fittings/cables etc.
http://www.dabs.com/ProductView.aspx?QuickLinx=3NWV
My com...
Re: FN-FORUM: quiet? + flash 8
date posted 25th October 2005 15:59
Also kirupa.com has some now I think too
On 25/10/05 16:04, "allison mc connell" [EMAIL REMOVED] wrote:
>
> Hi Ian, try FlashGuru - wwwflashguru.co.uk or Mock.org:Flash -
> wwwmoock.org/webdesign/...
Re: FN-FORUM: quiet? + flash 8
date posted 25th October 2005 15:54
Hi Ian, try FlashGuru - wwwflashguru.co.uk or Mock.org:Flash -
wwwmoock.org/webdesign/flash - good luck
On 25 Oct 2005 14:34:17 -0000, Ian Copeland [EMAIL REMOVED] wrot=
e:
>
> A bit.
> Anyone know w...
Re[2]: FN-FORUM: doing so well ...
date posted 25th October 2005 15:33
Hi Steve,
Tuesday, October 25, 2005, 3:30:32 PM, you wrote:
> this should help you surely?
> http://www.w3.org/TR/SVG/filters.html
Err not unless he's generating SVG images on the fly for his site...
RE: FN-FORUM: quiet?
date posted 25th October 2005 15:30
I wouldn't call it dead, it's nice to get back to a manageable volume of
mail for a bit :) Perhaps it's the calm before the storm ?
:: -----Original Message-----
:: is it me or is the forum complet...
Re: FN-FORUM: doing so well ...
date posted 25th October 2005 15:29
Hi John,
Tuesday, October 25, 2005, 3:26:38 PM, you wrote:
> Can anyone tell me a 'valid' way of setting a filter as follows:
> filter: Alpha(opacity=65); -moz-opacity:.65;
It's not a valid CSS att...
Re: FN-FORUM: quiet?
date posted 25th October 2005 15:28
On 25 Oct 2005 14:28:42 -0000, Thomas Design [EMAIL REMOVED] wr=
ote:
>
> is it me or is the forum completely dead????
>
There have been a number of messages today, so unless you have an
unusual defi...
Re: FN-FORUM: quiet?
date posted 25th October 2005 15:25
Hi Thomas,
Tuesday, October 25, 2005, 3:28:51 PM, you wrote:
> is it me or is the forum completely dead????
It's you. Have been loads of messages today!
Cheers,
Rich
--
Zend Certified Engineer
h...
RE: FN-FORUM: quiet? + flash 8
date posted 25th October 2005 15:23
A bit.
Anyone know where to get good flash 8 tutorials?
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] On Behalf Of Thomas
Design
Sent: 25 October 2005 15:29
To: FN-FORUM / [EMAIL...
Re: FN-FORUM: quiet?
date posted 25th October 2005 15:22
well i've had around 26 forum messages today so it must be you...
;-)
steve
Thomas Design [EMAIL REMOVED] wrote:
>
> is it me or is the forum completely dead????
>
> D Thomas...
Re: FN-FORUM: multiple computers
date posted 25th October 2005 15:22
Hi Digital,
Tuesday, October 25, 2005, 1:02:16 PM, you wrote:
> Having now got all set up with laptop etc, I now have all my stuff like
> Dreamweaver (with its associated sites in the management win...
Re: FN-FORUM: doing so well ...
date posted 25th October 2005 15:20
this should help you surely?
http://www.w3.org/TR/SVG/filters.html
steve
John 'Max' Maxwell [EMAIL REMOVED] wrote:
>
> Well, The Pig Farmer was almost totally validated - the whole site (not bad...
FN-FORUM: quiet?
date posted 25th October 2005 15:18
is it me or is the forum completely dead????
D Thomas...
FN-FORUM: doing so well ...
date posted 25th October 2005 15:16
Well, The Pig Farmer was almost totally validated - the whole site (not bad
for a Dreamweaver wielding arty farty) .. but then the CSS file was a step
too far.
Can anyone tell me a 'valid' way of set...
Re: Re[2]: FN-FORUM: pages being stored in cache
date posted 25th October 2005 14:27
>> To ensure that pages aren't cached.
>
> Not wanting to be pedantic or anything, but it won't _ensure_ the page
> isn't cached, it will just request it.
Good point!
Anthony
--
www.fonant.com - ha...
RE: FN-FORUM: pages being stored in cache
date posted 25th October 2005 14:09
I believe though that most other ISP's renew their cache on a more regular
basis than AOL used to.
:: -----Original Message-----
::
:: Its not just AOL. Pretty much every ISP runs their own transp...
FN-FORUM: multiple computers
date posted 25th October 2005 12:50
Hi,
Question time again...
Having now got all set up with laptop etc, I now have all my stuff like
Dreamweaver (with its associated sites in the management window), photoshop
and related files on my...
Re: FN-FORUM: pages being stored in cache
date posted 25th October 2005 11:59
CreativeNRG.co.uk wrote:
> I haven't had a customer on AOL for a few years but
> this added a further complexity to the problem in my past experience because
> they also serve(or at least used to) con...
RE: FN-FORUM: MS Organisational Chart
date posted 25th October 2005 11:55
No, there's no shortcut to it. The only time I can see anything to do with
it is when I go into powerpoint and edit a chart. Then it pops up, but not
for other users.
-----Original Message-----
From...
Re[2]: FN-FORUM: pages being stored in cache
date posted 25th October 2005 11:45
Hi,
Tuesday, October 25, 2005, 11:03:55 AM, you wrote:
> In PHP I use:
> //----- No-cache headers -----
> header("Expires: Mon, 26 Jul 1997 05:00:00 GMT"); // Date in the past
> header("Cache-Co...
Re: FN-FORUM: pages being stored in cache
date posted 25th October 2005 11:20
On Tue, 25 Oct 2005, James Fleming wrote:
> until they press refresh. Has anyone any ideas how they can see the new
> pictures without them having to press the refresh button?
A quick hack might be...
RE: FN-FORUM: pages being stored in cache
date posted 25th October 2005 11:18
"The old pictures are gone forever" - but only until the next change and
then the problems start again. It's a vicious circle.
I agree that caching is a good thing....but after development and client...
Re: FN-FORUM: pages being stored in cache
date posted 25th October 2005 11:07
Yes, but the client only needs to do this once, then the old pictures
will be gone for ever.
And browsers caching images is a good thing generally as it speeds up
the page viewing time when someone...
Re: FN-FORUM: pages being stored in cache
date posted 25th October 2005 10:53
> Hi, I have built a web site for a client and recently needed to changes
> some
> pictures on the site but the problem is that the old pictures are being
> stored in their cache and their customers...
Re: FN-FORUM: pages being stored in cache
date posted 25th October 2005 10:47
You can set the content expiry date on the HTML page itself. The browser
picks up on this and refreshes by itself.
http://www.i18nguy.com/markup/metatags.html
etc
Have fun :)
Juan
Ray McGinty wrote:...
RE: FN-FORUM: pages being stored in cache
date posted 25th October 2005 10:43
The problem with that solution is that it requires more clicks than simply
hitting the refresh button. I think the original request was to prevent the
pages caching in the first place ?
:: -----Origi...
RE: FN-FORUM: pages being stored in cache
date posted 25th October 2005 10:42
Try adding the following in the of your HTML file:
HTH, Simon
:: -----Original Message----
:: old pictures are being
:: stored in their cache and the...
Re: FN-FORUM: pages being stored in cache
date posted 25th October 2005 10:39
Tools > Internet Options > Delete Files
On 25 Oct 2005, at 10:42, James Fleming wrote:
> Hi, I have built a web site for a client and recently needed to
> changes some
> pictures on the site but th...
FN-FORUM: pages being stored in cache
date posted 25th October 2005 10:33
Hi, I have built a web site for a client and recently needed to changes some
pictures on the site but the problem is that the old pictures are being
stored in their cache and their customers are onl...
Re: FN-FORUM: Anybody know any good printers?
date posted 25th October 2005 10:28
Duncan,
Try RCS...
http://www.rcs.plc.uk/seasonal/start.asp
They do a decent range of calendars etc.
Cheers,
Chris.
Find the cheapest mobile phone offers with 12 months free line rental on
a 1...
RE: FN-FORUM: Anybody know any good printers?
date posted 25th October 2005 10:26
I've just had a quote from Kevin at FinePrint in Harrogate for calendar
printing for the FTO Owners Club - very competative.
Give him a call on
01423-523836=20
And tell him I sent you,
Cheers
Andy...
RE: FN-FORUM: Anybody know any good printers?
date posted 25th October 2005 10:19
B3print.co.uk ask for Ian, very friendly very good they have printed
many things for me in the past - nice and cheap.
Craig...
FN-FORUM: Anybody know any good printers?
date posted 25th October 2005 10:15
Hi guys!
Basically, I am planning on having a standard A4 calender printed,
with one page per month, and full colour print on each page. I have
looked around through google, and a lot seem to adverti...
RE: FN-FORUM: MS Organisational Chart
date posted 25th October 2005 10:15
You'll probably find the shortcut in your start menu is only in your
profile.
Right click your start button, click explore, in explorer window browse your
programs folder to find the shortcut to the...
Re: FN-FORUM: Whois
date posted 25th October 2005 10:08
Lovely - thanks - I have just installed it - Pam
----- Original Message -----
From: "Ian Robertson" [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sent: Tuesday, October 25, 2005 8:51 AM
Subject: Re: FN-FORUM:...
FN-FORUM: MS Organisational Chart
date posted 25th October 2005 09:56
Hi,
Does anyone know about MS Organisational Chart?
Someone installed it on my computer a while ago and I can use it if I log
in, but if someone else logs in, they can't use it. Is it part of Office?...
Re: FN-FORUM: Whois
date posted 25th October 2005 08:41
Firefox has a toolbar extension DNSStuff which provides an easy interface to
dnsstuff.com
Ian
--
Homepage http://narian.org.uk GSM: +44-7906-204-878 ICQ: 243824356...
FN-FORUM: OT - M$ has a sense of humour?
date posted 25th October 2005 08:26
*http://tinyurl.com/cwgp9
rich*...
Re: FN-FORUM: Whois
date posted 25th October 2005 06:39
I used to use dnsstuff.com, but now for whois i use whois.sc it
provides far more detailed information. It also has a lot of other
neat tools to play with.
:)
Tam
--
www.dreadlabs.com...
Re: FN-FORUM: Whois
date posted 25th October 2005 00:54
or nominet website does too
----- Original Message -----
From: "Billy Hasirci" [EMAIL REMOVED]
To: [EMAIL REMOVED]
Sent: Tuesday, October 25, 2005 12:15 AM
Subject: RE: FN-FORUM: Whois
>
> I use...
RE: FN-FORUM: Whois
date posted 25th October 2005 00:05
I use dnsstuff.com. Very handy.
--
Billy Hasirci
--
Hasirci.com
T +44 (0)20 8288 3963
M +44 (0)7702 591 492
E [EMAIL REMOVED]
W www.hasirci.com
--
> -----Original Message-----
> From: [EMAIL REMO...
|
|