Freelancers Forum Messages on Sunday April 30th 2006
Re: FN-FORUM: Network over ringmain
date posted 30th April 2006 20:23
> Generally speaking, can a wireless router also act as a secondary
> access point/switch? Can I extend the network using two identical
> wireless routers in other words?
Maybe, it depends upon the f...
RE: FN-FORUM: Network over ringmain
date posted 30th April 2006 20:18
Hi,
Anything over the 100m will cause loss of signal. Not just loss of
speed. You could wack a powered hub in between or a switch. This would =
be
the cheapest.
James Jenkins
http://www.tamarsolutio...
Re: FN-FORUM: Network over ringmain
date posted 30th April 2006 19:47
Ege,
Thanks for your reply.
On 30 Apr 2006, at 20:15, ege iyioglu wrote:
> I suggest that you don't invest in such a technology yet as it has
> quite a
> few problems in real-life environments.
>...
RE: FN-FORUM: Network over ringmain
date posted 30th April 2006 19:43
I've a client who's got a farm and wants to network the packing shed to =
the main office. There is a cable trunk between the two that carries a =
phone line and power line - distance is about 100-150...
Re: FN-FORUM: Network over ringmain
date posted 30th April 2006 19:19
Hello
I suggest that you don't invest in such a technology yet as it has quite a
few problems in real-life environments.
The suggested 85 Mbps speed remains in theory, and is only possible under
o...
RE: FN-FORUM: Converting C# to VB 6
date posted 30th April 2006 19:05
HI,
How much code do you need to convert?
James
http://www.tamarsolutions.co.uk
-----Original Message-----
From: [EMAIL REMOVED] [EMAIL REMOVED] On Behalf Of Ben Moxon
Sent: 30 April 2006 19:39
To...
Re: FN-FORUM: Converting C# to VB 6
date posted 30th April 2006 18:42
You're more likely to find tools to move code from VB6 to C# than the
reverse- even if there is one, tools that change code from one language
to another are usually fairly dodgy. I'm pretty sure you...
FN-FORUM: Network over ringmain
date posted 30th April 2006 13:52
Hi,
Has anyone had any experience with this setup:
http://www.devolo.co.uk/uk_EN/produkte/dLAN/mldlanhsstarterkit.html
I'm wanting to use it with OSX.
Comments gratefully received.
Thanks!
Simon...
RE: FN-FORUM: Converting C# to VB 6
date posted 30th April 2006 11:08
If you mean C# to VB (non-net version then I would doubt it since it would
have to replace all of the NET classes and not all of them are supported in
VB (non-net) but if you want to convert C# into v...
|
|