Freelancers Forum Messages on Wednesday August 1st 2007
Re: FN-FORUM: Is this fair? I cant decide...
date posted 1st August 2007 21:27
On Wednesday 01 August 2007 21:22:47 Fiaz Khan wrote:
> Dom Latter wrote:
> > What sort of work, what sort of rates?
>
> It was adding a few features to a wordpress installation. So i thought
> it wou...
Re: FN-FORUM: Is this fair? I cant decide...
date posted 1st August 2007 19:57
Dom Latter wrote:
> What sort of work, what sort of rates?
It was adding a few features to a wordpress installation. So i thought
it would be a nice self contained project. His rates amounted to £29...
FN-FORUM: Prosperity 4
date posted 1st August 2007 19:27
Does anyone on this list use Prosperity 4 ?
AKA the worst umbrella company in the history of the world.
I have it on good authority that they have gone into administration today....
Re: FN-FORUM: Is this fair? I cant decide...
date posted 1st August 2007 19:17
On Wednesday 01 August 2007 19:50:31 Fiaz Khan wrote:
> I did in fact, this morning, get a small piece of work that i wasnt
> going to have time to do so i asked him to quote for it. He came back
> w...
RE: FN-FORUM: Is this fair? I cant decide...
date posted 1st August 2007 19:08
Fiaz Khan wrote:
> I got a call today from someone starting out in web development. It
> was a typical networking type call, just trying to get his name out
> there.
>
> I did in fact, this morning...
RE: FN-FORUM: Is this fair? I cant decide...
date posted 1st August 2007 18:37
That's a tough one, but I know what you mean.
I have done many contracts on site for big agencies in central london.
You start on the same day as a guy using Dreamweaver who is on the same rate
as y...
FN-FORUM: Is this fair? I cant decide...
date posted 1st August 2007 18:24
I got a call today from someone starting out in web development. It was
a typical networking type call, just trying to get his name out there.
I did in fact, this morning, get a small piece of work...
Re: FN-FORUM: Protecting a web page from copying?
date posted 1st August 2007 18:10
Yes it does!
Its over protware :P
From: "Julian Voelcker"
>
> Hi Martin,
>
>> I know you've past this bit but I just wanted to add with this
>> www.protware.com protection, I viewed the page using...
RE: FN-FORUM: Remote desktop problems
date posted 1st August 2007 17:10
Hi,
I would suggest changing the RDP port for your work PC and setup a forward
to the internal ip address for the work PC then connect through rdp to
PCNAME:PORTNO
This is how I connect to my home...
Re: FN-FORUM: Remote desktop problems
date posted 1st August 2007 16:59
Cheers for all the info
I changed port 3389 to point to my works pc now and then I can remote access
the mail server from that, beats having to setup 2 remote connections!
D Thomas...
Re: FN-FORUM: Remote desktop problems
date posted 1st August 2007 16:22
On Wednesday 01 August 2007 17:21:57 Adam Reynolds wrote:
> Except I think he wants to connect to a number of machines behind his
> router. So he needs to connect to one machine through the router an...
RE: FN-FORUM: Remote desktop problems
date posted 1st August 2007 16:04
Aha RDP to more than one PC behind a router!! It's possible to change the
RDP port on one PC (or both) (http://support.microsoft.com/kb/306759) and
simply forward both ports and setup a different conn...
Re: FN-FORUM: Remote desktop problems
date posted 1st August 2007 15:58
>> Might sound a bit stupid (more than likely!!) but how can I connect to
>> either PC on the one ip address?
>>
>>
>> D Thomas
>
> setup port forwarding on your router to direct port 3389 to the loca...
Re: FN-FORUM: Remote desktop problems
date posted 1st August 2007 15:56
Dave Martin wrote:
>> Might sound a bit stupid (more than likely!!) but how can I connect to
>> either PC on the one ip address?
>>
>>
>> D Thomas
>>
>
> setup port forwarding on your router to...
RE: FN-FORUM: Remote desktop problems
date posted 1st August 2007 15:53
You just need to forward port 3389 (the same way your probably forwarding
ports for email like 25 and 110 etc.) to the internal IP of your work
machine (e.g. 192.168.1.21)
Make sure your work PC has...
Re: FN-FORUM: Remote desktop problems
date posted 1st August 2007 15:45
> Might sound a bit stupid (more than likely!!) but how can I connect to
> either PC on the one ip address?
>
>
> D Thomas
setup port forwarding on your router to direct port 3389 to the local ip...
Re: FN-FORUM: Remote desktop problems
date posted 1st August 2007 15:43
I have done the exact thing to connect to my works network.
Basically I connect to the internet facing machine (in your case the
mail server). I connect via ssh using Putty.
With Putty you can setup...
Re: FN-FORUM: Remote desktop problems
date posted 1st August 2007 15:33
Could you not setup port forwarding, so you connect to one address via one
port, then another address via another port?
For example:
Address Machine
Adomainname.com:1475 --> mail se...
FN-FORUM: Remote desktop problems
date posted 1st August 2007 14:44
Hi all, my googling so far hasn't yielded any results on this and I'm in a
bit of a pickle as need to setup remote desktop on my work PC before the end
of today if anyone can throw a little light on...
Re: FN-FORUM: Protecting a web page from copying?
date posted 1st August 2007 13:58
Hi Martin,
> I know you've past this bit but I just wanted to add with this
> www.protware.com protection, I viewed the page using firebug installed in
> firefox and got the html, the css, and th...
Re: FN-FORUM: OT wednesday fun
date posted 1st August 2007 12:00
Derek Almond (lists) wrote:
> Probly not true (Any one care to check snopes), but did make me laugh,
> mainly because I got told off for two of the things on here my self in the
> past
snopes says
ht...
Re: FN-FORUM: OT wednesday fun
date posted 1st August 2007 11:55
Derek Almond (lists) wrote:
> Probly not true (Any one care to check snopes), but did make me laugh,
> mainly because I got told off for two of the things on here my self in the
> past
which ones?...
FN-FORUM: OT wednesday fun
date posted 1st August 2007 10:59
Probly not true (Any one care to check snopes), but did make me laugh,
mainly because I got told off for two of the things on here my self in the
past
D
This letter was recently sent by Tesco's Hea...
Re: FN-FORUM: cms problem
date posted 1st August 2007 09:54
Ah - I didn't write it by the way and I wish the person who had hadn't done
it that way. I think the problem is that the Diary div is being partly
obscrured by the left hand navigation but I can ge...
RE: FN-FORUM: cms problem
date posted 1st August 2007 09:16
Hi Pam
There are several problems, but I think you should use better mark-up for
the month layouts at the moment you have:
September
Oc...
FN-FORUM: cms problem
date posted 1st August 2007 08:55
I can't get this right in Firefox. In IE you can click on September, October
2005, 2006 etc but not in Firefox
Thanks
Pam
Oswestry School Template...
RE: FN-FORUM: Site check http://inextra.wiredeyes.net/
date posted 1st August 2007 07:51
> -----Original Message-----
> all looks fine to me on OSX (firefox, Opera and Safari 3)
>
> screenshot off list.
Thanks Tony, better than expected and cheers for the screenie. :)
Regards
Sam Mor...
Re: FN-FORUM: Site check http://inextra.wiredeyes.net/
date posted 1st August 2007 07:37
On 1 Aug 2007, at 07:43, Sam M - www.wiredeyes.com wrote:
>
> Any feedback on problems with this initial template on Macs and the
> like
> would be appreciated.
all looks fine to me on OSX (firef...
FN-FORUM: Site check http://inextra.wiredeyes.net/
date posted 1st August 2007 07:18
Any feedback on problems with this initial template on Macs and the like
would be appreciated.
http://inextra.wiredeyes.net/
Thanks
Sam Morgan
WiredEyes Media / ServWise Advanced Hosting
tel (Uk)...
RE: FN-FORUM: Protecting a web page from copying?
date posted 1st August 2007 01:22
On Tuesday 31 July 2007 16:11:13 Duncan Glendinning wrote:
>> Is there something more reliable, or is this just a no-hoper?
Dom:
>It's a no-hoper. Give the client five minutes to understand that i...
Re: FN-FORUM: Sys file that I cant delete
date posted 1st August 2007 00:27
Hi Nic,
When I had a problem like this it usually meant it's that time of a
month again when I need to reinstall (restore a backup) of my Windows
XP.
Never tried that myself but you can find some mi...
Re: FN-FORUM: Protecting a web page from copying?
date posted 1st August 2007 00:05
I know you've past this bit but I just wanted to add with this
www.protware.com protection, I viewed the page using firebug installed in
firefox and got the html, the css, and the javascript out of...
|
|